TABLE OF CONTENTS
DIAGRAM
PART LIST
Clear callout
Select All
Ref.
Qty
Part #
Alts
Description
Image
-
1O-RING 0.139'' Thk x 0.984'' ID, -214, Cl 5, 75 Duro; SEAL - ''O'' ring, D23736 piston
-
1PACKING; - piston
-
1PACKING; - piston rod
-
1LOCK NUT 1''-14, GB; 1'' - 14 NF hex. locking jam nut
-
1NO LONGER SERVICED; WASHER - packing piston
-
4BUSHING 38.33mm ID x 44.45mm OD x 17.6mm L; - cylinder end and piston rod yoke
-
1WIPER SEAL; - wiper, piston rod
-
1SNAP RING 2.75'', Int, #275; Ring, Snap, , seal, piston rod 2.75'', Int, #275
-
1WASHER; - packing, piston rod (D23007 end cap) See D25044
-
2O-RING 3.249'' ID x 3 1'' OD x 0.139''; SEAL - ''O'' ring cylinder tube
-
1LUBE NIPPLE 90 Degree Elbow, 1/8'' - 27 NPTF; NIPPLE, LUBE, 90?, 1/8'' NPT x .84'' lg
-
8LOCK NUT 1/2''-20, GA; 1/2'' - 20 NF hex. locknut (Tie rods with NF threads)
-
8LOCK NUT 1/2''-13, GA; 1/2'' - 13 NC hex. locknut (Tie rods with NC threads)
-
1X; CAP - end, cylinder (Has no. D23007 on casting) Use D25588 and D25044;When replacing cylinder end or cap that has .185'' wide ''O'' ring groove, also order D25495 leather backup ring, as replacement end or cap has .210'' wide ''O'' ring groove.
-
1LUBE NIPPLE 1/8'' - 27 NPTF; 1/8'' NPT straight grease fitting
-
1LOCK NUT 1''-14, GB; 1'' - 14 NF piston locknut
-
2RING; - leather backup (Used only with cylinder end or cap that has .210'' wide ''O'' ring groove) See D25495
-
1WASHER; - packing, piston rod (D25588 end cap) See 31539
-
2RING; - plastic backup (Used only with cylinder end or cap that has .185'' wide ''O'' ring groove) See D24987
-
UARKIT; SEAL
Select All
Select
Ref.
Qty
1Availability
Part #
A7623Description
O-RING 0.139'' Thk x 0.984'' ID, -214, Cl 5, 75 Duro; SEAL - ''O'' ring, D23736 pistonImg
Alts
Select
Ref.
Qty
1Availability
Part #
131-19Description
LOCK NUT 1''-14, GB; 1'' - 14 NF hex. locking jam nutImg
Alts
Select
Ref.
Qty
1Availability
Part #
NLSDescription
NO LONGER SERVICED; WASHER - packing pistonImg
Alts
Select
Ref.
Qty
4Availability
Part #
30613Description
BUSHING 38.33mm ID x 44.45mm OD x 17.6mm L; - cylinder end and piston rod yokeImg
Alts
Select
Ref.
Qty
1Availability
Part #
100-21275Description
SNAP RING 2.75'', Int, #275; Ring, Snap, , seal, piston rod 2.75'', Int, #275Img
Alts
Select
Ref.
Qty
1Availability
Part #
31539Description
WASHER; - packing, piston rod (D23007 end cap) See D25044Img
Alts
Select
Ref.
Qty
2Availability
Part #
49381Description
O-RING 3.249'' ID x 3 1'' OD x 0.139''; SEAL - ''O'' ring cylinder tubeImg
Alts
Select
Ref.
Qty
1Availability
Part #
219-55Description
LUBE NIPPLE 90 Degree Elbow, 1/8'' - 27 NPTF; NIPPLE, LUBE, 90?, 1/8'' NPT x .84'' lgImg
Alts
Select
Ref.
Qty
8Availability
Part #
230-4618Description
LOCK NUT 1/2''-20, GA; 1/2'' - 20 NF hex. locknut (Tie rods with NF threads)Img
Alts
Select
Ref.
Qty
8Availability
Part #
131-354Description
LOCK NUT 1/2''-13, GA; 1/2'' - 13 NC hex. locknut (Tie rods with NC threads)Img
Alts
Select
Ref.
Qty
1Availability
Part #
D23007Description
X; CAP - end, cylinder (Has no. D23007 on casting) Use D25588 and D25044;When replacing cylinder end or cap that has .185'' wide ''O'' ring groove, also order D25495 leather backup ring, as replacement end or cap has .210'' wide ''O'' ring groove.Img
Alts
Select
Ref.
Qty
1Availability
Part #
219-1Description
LUBE NIPPLE 1/8'' - 27 NPTF; 1/8'' NPT straight grease fittingImg
Alts
Select
Ref.
Qty
1Availability
Part #
131-19Description
LOCK NUT 1''-14, GB; 1'' - 14 NF piston locknutImg
Alts
Select
Ref.
Qty
2Availability
Part #
D24987Description
RING; - leather backup (Used only with cylinder end or cap that has .210'' wide ''O'' ring groove) See D25495Img
Alts
Select
Ref.
Qty
1Availability
Part #
D25044Description
WASHER; - packing, piston rod (D25588 end cap) See 31539Img
Alts
Select
Ref.
Qty
2Availability
Part #
D25495Description
RING; - plastic backup (Used only with cylinder end or cap that has .185'' wide ''O'' ring groove) See D24987Img
Alts